Shandong Xinhongda Thermal Insulation Machinery Equipment Co

Lightweight Partition Board
Board head, beam connector and rod glass fiber mesh should be cleaned, packed and watered before the board feet are on the ground. When the clearance between the board feet and the ground is less than 1, ensure that the blockage is tight. , made with gravel: cement mortar fine stone concrete, concrete wall partition wall panel door installation direction, instead, for making up the small board, and then fill in the edge or middle of the concrete wall column on the wall that cannot be made up at the door, siding board The fixed installation should have concave and convex grooves on the upper and lower parts of the side walls ∮ each hitting the steel head in the middle for better fixation on the wall. For the remaining holes, grooves and other parts of the assembly line processing steps, it is necessary to reserve the wall plate for designing the air conditioning pipeline holes. The wall plate should be possible to cut the hole away from the safety plate to reduce the installation of the wall plate, and then flush Drill holes are used for wall mounting plate holes. The holes must be cut with a cutting machine. Do not use a hammer to hit them. It may damage the wall. When the measured height of the floor board is inconsistent, it is often necessary to join the board. The joints of the joint board must be wrong. The joints are staggered by one centimeter. At the junction of the bottom wall plate of the beam and the plate, the top is gray, and a little mortar is added for contact. The upper and lower ends of the concave and convex grooves are hit with steel heads, and the beam ends are connected to the ground and the wall to improve the overall performance.
Characteristics of hollow lightweight partition boards: Hollow lightweight partition boards are the fastest growing and most widely used product in recent years. They are the best material to replace clay bricks in non-load-bearing parts of buildings. The partition board is light in weight, environmentally friendly, energy-saving, soundproof, heat-insulating, fire-proof and decorative. It can be directly clad with bricks and painted, and can be drilled and hung in any hole, which can increase the usable area. The product weighs the same as a clay brick and has the performance of a brick wall. The product's water-proof, moisture-proof, waterproof and earthquake-proof properties are better than those of gypsum board and silicon magnesium board. The construction features are fast installation and easy operation. This product is suitable for partitioning non-load-bearing parts of bathrooms and kitchens in high-rise buildings. It is also suitable for the construction of various quick-installation rooms and the addition of floors to old houses.